Cabot® DeckCorrect™

Go with beauty that stands up to Mother Nature. Cabot® DeckCorrect is a solid resurfacer that prolongs the life of your deck. It’s easy to apply with a standard 3/8” roller and offers long-lasting coverage for wooden deck surfaces. Available in 50 colors, DeckCorrect protects from UV sun damage, extreme temperatures, rain & moisture.

  • Fills cracks to ¼”
  • Locks down splinters
  • Smooth and skid-resistant that resists dirt
  • Hoses off easily
  • Ideal for weathered or stained decks and patios


Coverage
75 ft²/gal
For Use In Location
Exterior
Opacity
Solid
Dry Time
4 hour - 6 hour
Recommended Coats
2
Dry to Recoat
4 hour - 6 hour
Package Sizes
1-Gallon, 5-Gallon
Cleanup
Water Cleanup
Cleanup Details
Clean brushes and equipment with soap and water. Dispose of empty cans or unused portion in accordance with local, state and federal regulations.

Reviews

Application Directions

  • Before You Begin instructions
    • Surface should be clean, porous and free of any previous finishes
    • For concrete: sprinkle a few drops of water on the surface; if they are quickly absorbed then the surface is ready to prep
    • Let wood dry in the open air for 3-5 days
    • Always apply to a small test area and allow to dry
    • Cover nearby bushes and flowers
    • Apply when air and surface temperatures are between 50 ˚F and 90 ˚F
  • Preparation Warning
    WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
  • SURFACE PREPARATION
    • If needed, sand with 80-100-grit (120-180 grit for rougher surfaces) sandpaper to remove any loose wood fibers
    • Replace severely damaged or rotting boards
    • Clean with Cabot Wood Cleaner to remove dirt, grime, mildew and other contaminants
    • If needed, brighten with Cabot Wood Brightener to remove rust stains, tannin bleed or discoloration
    • If needed, remove old water- or oil-based coatings with Cabot Wood Stripper and neutralize with Cabot Wood Brightener
    • Check the label for additional and specialized directions
  • APPLICATION STEPS
    • Shake and stir thoroughly before and during use. If project requires more than one container, blend all containers together to ensure uniformity.
    • Working in small sections at a time (1-3 boards), use a nylon/polyester brush to dab DeckCorrect® into cracks and rough areas before rolling. Use a 3/8-inch nap roller to apply a thick, even coat, rolling lengthwise along boards.
    • Allow to dry 4-6 hours before applying second coat. Requires a two-coat application.
    • For best results, on vertical surfaces such as railings, Cabot® Solid Color Stain is recommended
  • CAUTIONS
    CONTAINS CRYSTALLINE SILICA. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Adequate ventilation required when sanding or abrading the dried film. If adequate ventilation cannot be provided wear an approved particulate respirator (NIOSH approved). Follow respirator manufacturer’s directions for respirator use. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Abrading or sanding of the dry film may release crystalline silica which has been shown to cause lung damage and cancer under long term exposure. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN.

Cabot® DeckCorrect™

Product Number Base/Color Container Size SDS PDS
080351812019 Tint Base 1 Gallon SDS -
080351812026 Tint Base 5 Gallon SDS -