Protective Top Coat
(Click to download product details)
- Fast drying
- Protects from nicks, scratches, and stains
- Use on floors, doors, furniture, and cabinets
- Satin, semi-gloss, gloss
Interior Polyurethane is an ultra durable finish formulated to protect interior wood surfaces from nicks, scratches, spills and stains. This easy-to-apply polyurethane enhances the natural wood grain with a beautiful, clear finish. For interior and protected exterior wood surfaces including floors, doors, furniture and cabinets
Approximately 500-650 sq. ft./gal. (46-60 m²) depending upon surface porosity.
Where to Use
Use on bare, stained or previously varnished or finished wood. This product is fast drying, has superior durability, and protects against spills and stains.
Preparing Your Surfaces
General: Clean and dry surface thoroughly. Remove all dirt, dust, wax and wood marks. Do not apply over lacquer or shellac.
New Wood: Smooth wood lightly with sandpaper. Stain, if desired, and sand lightly again. Remove sanding dust before finishing.
Painted or Varnished Wood: Remove all paint and varnish in poor condition with sandpaper or paint and varnish remover following manufacturer's instructions.
DO NOT SHAKE! Stir well before using, Check effect on extra wood or hidden area. Apply a uniform, thin coat using high-quality natural bristle brush. Allow to dry overnight before applying additional coats. For best results, apply two thin coats.
Cleanup and Disposal
Clean brushes and equipment with mineral spirits. Dispose of empty cans or unused portion in accordance with local, state and federal regulations. Close container when not in use. Soak oily rags, lambswool, steel wool, cloths or any other material in water after use to avoid spontaneous combustion. Danger: Rags, steel wood or waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after each use, place rags, steel wool or waste in a sealed, water-filled metal container. Dispose of according to local regulations.