CABOT EXTERIOR REBATE: $7 OFF GALLON OR $30 OFF 5-GALLON, 7/27 - 8/9

Interior Surface Prep

Cabot Stains Pre-Stain Conditioner

Pre-Stain Wood Conditioner

Available Finishes
(Click to download product details)

Quick Facts

  • Oil based formula
  • Seals porous softwoods
  • Provides uniform color development

Safety Info

Related Products

Cabot Stains Oil Wood Stain

Oil Wood Stain

 
 
Cabot Stains Oil Polyurethane

Oil Polyurethane

 
 

Features

Cabot Interior Pre-Stain Wood Conditioner is ideal for use on porous, soft-grained woods in order to achieve uniform penetration of stain. Formulated to stabilize uneven wood grain, it ensures a more even stain color and consistent appearance.

Coverage

One quart covers up to 100 sq. ft. (9.3 m²) depending upon surface porosity. Do not thin.

Where to Use

Cabot Interior Pre-Stain Wood Conditioner can be used on porous and soft-grained woods.

Preparing Your Surfaces

General: Clean and dry surface thoroughly, removing all dirt, dust, wax and wood marks.
New Wood: Lightly wipe surface of clean wood with a damp sponge to raise the grain. Allow to dry and then sand smooth. Repeat process if not smooth. Remove sanding dust before staining.
Painted or Varnished Wood: Remove all paint and varnish with sandpaper or paint and varnish remover following manufacturer's instructions and safety precautions. Then follow new wood instructions.

Application

On large surfaces, work quickly in small sections. Saturate wood with a uniform coat of Pre-Stain Conditioner using a clean, lint-free cloth, bristle or foam brush. Allow no more than 5 minutes for penetration. Then wipe off all excess. Immediately after removal of Conditioner, apply Cabot Wood Stain following label directions. Do not allow Conditioner to dry. Surfaces which are allowed to dry will not accept stain!

Cleanup and Disposal

Clean brushes and equipment with mineral spirits. Dispose of empty cans or unused portion in accordance with local, state and federal regulations. Close container when not in use. Soak oily rags, lambswool, steel wool, cloths or any other material in water after use to avoid spontaneous combustion. Danger: Rags, steel wood or waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after each use, place rags, steel wool or waste in a sealed, water-filled metal container. Dispose of according to local regulations.

Interior Surface Prep

Cabot offers a complete line of preparation products for virtually every project need.